When recording in stereo mode, each side of the XLR adapter carries one part of the stereo pair. Use the included 5 pin to stereo XLR adapter to plug the Yeti in to your recording device or microphone pre-amp. Setting up the Yeti for Analogue (XLR) Recording To access this, press the Properties button, and then select the Levels tab. If you are recording something very loud or very quiet, adjust your input volume setting accordingly. Try starting the Input Volume at about 80%. To use the headphone jack from the Yeti, go to the Playback tab, and choose the “ Yeti Pro Stereo Microphone.” Set the playback volume to 100% using the same method as the recording volume was set in the recording tab.In the Recording tab, choose “ Yeti Pro Stereo Microphone.".In the Control Panel, pick the Sound icon.Visit and download the USB 2.0 driver.For detailed instructions on how to choose the recording and output resolution of the Yeti.Set the output volume to 100%, then adjust your listening volume with the physical volume knob on the Yeti. If you want to use headphones through the Yeti, go to the output tab, and choose the “ Yeti Pro Stereo Microphone” option.In the input tab, select “ Yeti Pro Stereo Microphone”.Go to System Preferences and select the Sound icon.Set the microphone gain knob to about 50%. Use the USB cable to plug the Yeti into your computer.Setting up the Yeti on a Computer On MAC NOTE: OSX 10.6.4 or higher is required. 2 Setting up the Yeti for Analogue (XLR) Recording.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |